Synthesis and liquid crystalline behavior of bulky poly(methacrylamide)s

N‐(Bis(4‐(2‐ethylhexyloxy)phenyl)(phenyl)‐methyl)methacrylamide was synthesized and polymerized via reversible addition‐fragmentation chain‐transfer (RAFT) polymerization. The chain‐transfer agent (4‐cyano‐4‐(phenylcarbonothioylthio) pentanoic acid (CPADB)), combined with a chiral additive, and a radical initiator yielded polymers with dispersities between 1.2 and 1.4. At low concentrations, the polymers are soluble in hexanes and chloroform while at higher concentrations they swell in these solvents. Characterization of the polymers by wide‐angle X‐ray scattering (WAXS) revealed an interplanar distance of 19.0 Å. The WAXS data combined with polarized optical microscopy support a lamellar crystallization and lyotropic liquid crystalline behavior in hexanes and chloroform. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2563–2568     

PN结物理特性的开放式测量实验方法研究

开放式、综合性量测实验的设计与应用,在巩固基础理论知识的同时,能够有效培养学生的动手实践能力、数据处理及分析能力,一定程度代表着大学物理实验课程的教学模式改革方向。以PN结物理特性的测量实验为例,基于通用型仪器与元器件的积木式组合,设计出简单、适用的实验电路;t=17.95℃时所采集的原始实验数据经三种模式回归分析,比较验证了PN结扩散电流与电压间遵循的玻尔兹曼分布律;计算出的玻尔兹曼常数与FD-PN-4测定仪的量测值相比,其结果说明了开放式测量实验方法的有效性。     

基于DIS数字信息化系统对透光物质透光性能的研究

采用DIS数字信息化系统,对不同浓度的蓝墨水溶液在激光光源照射下的透射平均照度及照度分布图像进行实验研究,得到了平均照度值随溶液浓度变化的规律。对不同颜色塑料膜片对白炽灯光源透过照度值及照度分布图像进行实验研究得到及其相关之规律。     

Synthesis of tertiary amine‐based pH‐responsive polymers by RAFT Polymerization

Well‐defined tertiary amine‐based pH‐responsive homopolymers and block copolymers were synthesized via reversible addition‐fragmentation chain transfer (RAFT) polymerization using 4‐cyanopentanoic acid dithiobenzoate (CPAD) as the RAFT agent for homopolymers and a poly(ethylene glycol) (PEG) macro‐RAFT agent for the block copolymers. ¹H NMR and gel permeation chromatography results confirmed the successful synthesis of these homopolymers and block copolymers. Kinetics studies indicated that the formation of both the homopolymers and the block copolymers were well defined. The pKa titration experiments suggested that the homopolymers and the related block copolymers have a similar pKa. The dynamic light scattering investigation showed that all of the block copolymers underwent a sharp transition from unimers to micelles around their pKa and the hydrodynamic diameter (D_h) was not only dependent on the molecular weight but also on the composition of the block copolymers. The polymer solution of PEG‐b‐PPPDEMA formed the largest micelle compare to the PEG‐b‐PDPAEMA and PEG‐b‐PDBAEMA with a similar molecular weight. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1010–1022     

Functional sample path properties of subsequence's C-R increments for a Wiener process in Hlder norm

In this paper, with the aid of large deviation formulas established in strong topology of functional space generated by H¨older norm, we discuss the functional sample path properties of subsequence's C-R increments for a Wiener process in H¨older normThe obtained results,generalize the corresponding results of Chen and the classic Strassen's law of iterated logarithm for a Wiener process.     

Lithium Insertion Mechanism in Iron-Based Oxyfluorides with Anionic Vacancies Probed by PDF Analysis

The mechanism of lithium insertion that occurs in an iron oxyfluoride sample with a hexagonal–tungsten–bronze (HTB)-type structure was investigated by the pair distribution function. This study reveals that upon lithiation, the HTB framework collapses to yield disordered rutile and rock salt phases followed by a conversion reaction of the fluoride phase toward lithium fluoride and nanometer-sized metallic iron. The occurrence of anionic vacancies in the pristine framework was shown to strongly impact the electrochemical activity, that is, the reversible capacity scales with the content of anionic vacancies. Similar to FeOF-type electrodes, upon de-lithiation, a disordered rutile phase forms, showing that the anionic chemistry dictates the atomic arrangement of the re-oxidized phase. Finally, it was shown that the nanoscaling and structural rearrangement induced by the conversion reaction allow the in situ formation of new electrode materials with enhanced electrochemical properties.     

Study of blood collection and sample preparation for analysis of vitamin D and its metabolites by liquid chromatography–tandem mass spectrometry

The analysis of vitamin D status, with special emphasis on 25-hydroxyvitamin D and 1,25-dihydroxyvitamin D, is gaining interest in clinical studies due to the classical and non-classical effects attributed to this prohormone. In this research, the influence of the two steps preceding determination (viz. sample collection and preparation) on the quantitative analysis of vitamin D and its more important metabolites has been studied. Two preparation approaches, deproteination and solid-phase extraction (SPE), have been evaluated in terms of sensitivity to delimit their application, thus establishing that detection of 1,25-dihydroxyvitamin D cannot be addressed by protein precipitation. Concerning sample collection, serum and plasma reported high accuracy (above 83.3%) for vitamin D and metabolites, while precision, expressed as relative standard deviation, was below 12.9% for all analytes in both samples. Statistical analysis revealed that serum and plasma provided similar physiological levels for vitamin D₃, 24,25-dihydroxyvitamin D₃ and 25-hydroxyvitamin D₃, while significantly different levels were obtained for 1,25-dihydroxyvitamin D₃, always higher in plasma than in serum. Sample collection and treatment have proved to be significant in the analysis of vitamin D and its relevant metabolites.     

Stabilization of self‐assembled microdroplets using short chain alcohols

The condensation of water vapor on a volatile polymeric solution leads to a porous surface after evaporation of both solvent and water. However, the stabilization of the water microdroplet is of great importance, which can be achieved using specific polymer or adding a third substance to the polymer solution. Short chain alcohols (methanol, ethanol, and n‐propanol) are utilized to fabricate a self‐assembled porous honeycomb film of linear, low molecular weight polystyrene using the breath figure technique. A combination of breath figure processing and the effect of alcohol on a water droplet can stabilize the pattern and make pores on the surface of the polymer film. The quality of the porous honeycomb film is strongly dependent on the type of alcohols and the concentration of polymer. In a specific range of polymer and alcohol concentration, pores cover all the surface of the polymer film. This method offers the possibility of producing a honeycomb structure with no trace of additive residual after the fabrication process and avoiding polymer modification. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 709–718     

Insight into copper-mordenite–silica mixtures (CuMOR–SiO2)

A series of ternary CuMOR–SiO₂ mixed materials were prepared by two synthesis approaches (CuMOR1–y–SiO₂ and CuMOR2–y–SiO₂). Extensive characterization was done for both series and some selected materials were tested in CO catalytic oxidation and NO reduction. The presence of CuMOR and SiO₂ segregated phases was observed in both series by XRD, suggesting that silica formation was not inhibited by the mordenite (MOR) presence. UV–Vis results exhibited that Cu ion exchange was successfully done for CuMOR1–y–SiO₂ series. In the CuMOR2–y–SiO₂ series, the amount of copper was below the sensitivity limit of EDS analysis. CuMOR1–50%–SiO₂ catalyst resulted with higher specific surface area and catalytic activity. A possible relation between reduction temperature, the increase in Cu plasmon excitation, and catalytic activity was observed.     

Infinite family of transmission irregular trees of even order

Distance between two vertices is the number of edges in a shortest path connecting them in a connected graph $G$. The transmission of a vertex $v$ is the sum of distances from $v$ to all the other vertices of $G$. If transmissions of all vertices are mutually distinct, then $G$ is a transmission irregular graph. It is known that almost no graphs are transmission irregular. Infinite families of transmission irregular trees of odd order were presented in Alizadeh and Klav?ar (2018). The following problem was posed in Alizadeh and Klav?ar (2018): do there exist infinite families of transmission irregular trees of even order? In this article, such a family is constructed.